PUSH-PULL CURRENT-TO-CURRENT AND VOLTAGE-TO-CURRENT CONVERTERS WITH OUTPUT SIGNAL SWITCHING

  • Oleksiy Azarov Vinnytsia National Technical University
  • Samoil Katsyv Vinnytsia National Technical University
  • Maksym Obertyukh Vinnytsia National Technical University
Keywords: current switches, high linearity, push-pull current-to-current converters

Abstract

The paper considers push-pull current-to-current and voltage-to-current converters with output signal switching. Relevance and expediency of designing such converters in order to expand functional capabilities due to providing additional ability to perform high-precision fast switching of the signals are substantiated. The circuits of push-pull current-to-current and voltage-to-current converters with output signal switching are proposed and analyzed. In order to analyze dynamic errors, occurring in the process of the diode commutation, its mathematical model is developed and calculated. The modeling results confirm adequacy of the model. Engineering recommendations on circuit implementation of the above push-pull current-to-current and voltage-to-current converters with output signal switching are presented.

Author Biographies

Oleksiy Azarov, Vinnytsia National Technical University

Dc. Sc. (Eng.), Professor, Dean of the Faculty of Information Technologies and Computer Engineering

Samoil Katsyv, Vinnytsia National Technical University

Cand. Sc. (Eng.), Assistant Professor, Assistant Professor of the Department of Theoretical Electrical Engineering and Electric Measurements

Maksym Obertyukh, Vinnytsia National Technical University

post-graduate student of the Computer Science Department

Published
2018-06-29
How to Cite
[1]
O. Azarov, S. Katsyv, and M. Obertyukh, “PUSH-PULL CURRENT-TO-CURRENT AND VOLTAGE-TO-CURRENT CONVERTERS WITH OUTPUT SIGNAL SWITCHING”, SWVNTU, no. 1, Jun. 2018.
Section
Information Technologies and Computer Engineering