RESEARCH ON THE INFLUENCE OF THE SPOOL WORKING EDGE SLOPE ON THE NONLINEARITIES OF THE PROPORTIONAL DIRECTIONAL CONTROL VALVE WITH ELECTROHYDRAULIC CONTROLLING

Authors

  • Leonid Kozlov Vinnytsia National Technical University
  • Dmytro Lozinsky Vinnytsia National Technical University

Abstract

There had been developed the mathematical model and conducted researches on the characteristics of the proportional directional control valve with electrohydraulic controlling, namely, the dependence of the main spool position on the servo spool displacement, pressure drop across the main spool edge and on the slope angle of the main spool working edge. As a result, the essential nonlinearities of the control system have been exposed both in static and dynamic operation modes. These nonlinearities can be reduced by means of selecting appropriate values for the slope angle of the main spool working edge.

Author Biographies

Leonid Kozlov, Vinnytsia National Technical University

Dean of Faculty of Technology, Automations that Computerizing of Machine-Engineering, Assistant Professor of the Department

Dmytro Lozinsky, Vinnytsia National Technical University

Post-Graduate student of the Department

Downloads

Abstract views: 162

How to Cite

[1]
L. Kozlov and D. Lozinsky, “RESEARCH ON THE INFLUENCE OF THE SPOOL WORKING EDGE SLOPE ON THE NONLINEARITIES OF THE PROPORTIONAL DIRECTIONAL CONTROL VALVE WITH ELECTROHYDRAULIC CONTROLLING”, Works of VNTU, no. 1, Dec. 2011.

Issue

No. 1 (2007): 2007№1

Section

Machine-Building and Transport

Metrics

Downloads

Download data is not yet available.

Most read articles by the same author(s)